This the multi-page printable view of this section. Click here to print.

Return to the regular view of this page.

    SaaS: Sysdig Secure Release Notes

    You may also want to review the update log for Falco rules used in the Policy Editor: [Falco Rules Changelog](/en/docs/release-notes/falco-rules-changelog/#falco-rules-changelog).

    Dates shown are for the initial release of a feature.  The feature may not be be rolled out to all regions concurrently.  Availability of a feature in a particular region will depend on scheduling.

    Supported Web Browsers

    Sysdig supports, tests, and verifies the latest versions of Chrome and Firefox.

    Other browsers may also work, but are not tested in the same way.

    October 13, 2021

    New Scanning Engine (Technology Preview)

    Sysdig Secure is developing a new scanning engine that will deliver major improvements, additional capabilities, and scanning-centric workflows.

    The first iteration is available to test and provides:

    • Much faster scan times: 4x to 10x faster initial image analysis
    • Extended vulnerability data, including CVSS scores, vectors containing the full exploitability data, availability of an associated public exploit, etc.
    • Inline scanner available as a stand-alone binary, no longer requires spawning a container
    • Better remediation advice, including ‘Which packages are the worst offenders in my image? Considering all the possible fix versions, which one should I apply?’
    • Improved, more intuitive user experience, with faster response times

    Important: The new engine is still on “Preview” phase.

    This means:

    • Not suitable for production. There is no forward compatibility guarantee for the data or configuration (yet)
    • Testing the new scanning preview will NOT affect any existing scanning workflows that leverage the current scanning backend. It is safe to enable the preview on any account.
    • Additional fundamental components are still in development; they will be released in an upcoming version.

    To test the new engine, simply enable the flag under Settings >User Profile>Sysdig Labs.

    See New Scanning Engine to download the Inline Scanner binary and begin.

    September 17, 2021

    Date Columns Added for Scheduled Scanning Reports

    In Sysdig Secure, the Scheduled Reports for Scanning now display additional vulnerability metadata for both runtime and registry reports.


    • Disclosure date: Time when the vulnerability information was registered in the feed
    • Solution date: Time when the fix version for this vulnerability (if any) was registered in the feed

    To avoid breaking compatibility with existing reports and external instrumentation, these fields will only be available for newly created reports; existing Scheduled reports (even if they are modified and saved again) will not contain these columns.

    September 8, 2021

    New and Updated Compliance Standards

    Sysdig Secure has added three new compliance standards and updated another. See also: Compliance

    Updates to PCI DSS v3.2.1 Compliance for Workload

    We have implemented some changes to the PCI DSS v3.2.1 for workload compliance checks. The control coverage for PCI is now: 1.1.2, 1.1.3, 1.1.5, 1.1.6.b, 2.2, 2.2.a, 2.2.1, 2.2.2, 2.4, 2.6, 4.1, 6.1, 6.2, 6.4.2, 6.5.1, 6.5.6, 6.5.8, 7.2.3, 10.1, 10.2, 10.2.1, 10.2.5, 10.2.7, 10.5.5, 11.5.1

    Checks added:

    • Check for Network Security enabled added to controls 1.1.2, 1.1.3 and 1.1.5

    • Check for Kubernetes audit enabled added to controls 4.1, 6.4.2 and 6.5.8

    Rules added:

    • Rule Outbound or Inbound Traffic not to Authorized Server Process and Port added to control 2.2.1

    • Rule Attach to cluster-admin Role added to controls 7.2.3 and 10.5.5

    • Rules EphemeralContainers Created and Terminal shell in container added to controls 10.1 and 10.2.1

    • Rules ClusterRole With Pod Exec Created , ClusterRole With Wildcard Created and ClusterRole With Write Privileges Created added to control 10.2

    • Rule Launch Privileged Container added to control 10.2.5

    • Rules Container Drift Detected (chmod) and Container Drift Detected (open+create) added to control 11.5.1

    Rules removed:

    • Rule All K8s Audit Events rule removed from controls 10.1, 10.2, 10.2.1, 10.2.7

    New PCI DSS v3.2.1 Compliance for AWS

    The PCI Quick Reference describes the full range of controls required to pass a PCI 3.2 audit. In this release, Sysdig Secure will add the following controls.

    For AWS protection: 2.2, 2.2.2, 10.1, 10.2.1, 10.2.2, 10.2.5, 10.2.6, 10.2.7, 10.5.5, 11.4

    New AWS Well Architected Framework Compliance

    The AWS Well Architected Framework whitepaper defines best practices to build secure, high-performing, resilient, and efficient infrastructure for applications and workloads.

    For workload protection, Sysdig Secure will check the following sections: OPS 4, OPS 5, OPS 6, OPS 7, OPS 8, SEC 1, SEC 5, SEC 6, SEC 7, REL 2, REL 4, REL 5, REL 6, REL 10, PERF 5, PERF 6, PERF 7

    For AWS protection, Sysdig Secure will check the following sectionsOPS 6, SEC 1, SEC 2, SEC 3, SEC 8, SEC 9, REL 2, REL 9, REL 10

    New AWS Foundational Security Best Practices v1 (FSBP) Compliance

    AWS Foundational Security Best Practices v1 (FSBP) describes the full range of controls to detect when your deployed accounts and resources deviate from security best practices.

    For AWS protection, Sysdig Secure will check the following sections: AutoScaling.1, CloudTrail.1, Config.1, EC2.6, CloudTrail.2, DMS.1, EC2.1, EC2.2, EC2.3, ES.1, IAM.1, IAM.2, IAM.4, IAM.5, IAM.6, IAM.7, Lambda.2, GuardDuty.1

    New NIST 800-171 rev2 Compliance

    The National Institute of Standards and Technology (NIST) Special Publication 800-171 rev2  describes the full range of controls required to pass a NIST 800-171 audit. It provides agencies with recommended security requirements for protecting the confidentiality of Controlled Unclassified Information (CUI) when the information is resident in nonfederal systems and organizations.

    For workload protection, Sysdig Secure will check the following sections:3.1.1, 3.1.2, 3.1.3, 3.1.5, 3.1.6, 3.1.7, 3.1.12, 3.1.13, 3.1.14, 3.1.15, 3.1.16, 3.1.17, 3.1.20, 3.3.1, 3.3.2, 3.3.5, 3.3.8, 3.3.9, 3.4.3, 3.4.5, 3.4.6, 3.4.7, 3.4.9, 3.5.1, 3.5.2, 3.11.2, 3.12.1, 3.13.1, 3.13.2, 3.13.3, 3.13.4, 3.13.5, 3.13.6, 3.13.8, 3.14.1, 3.14.2, 3.14.3, 3.14.4, 3.14.5, 3.14.6, 3.14.7

    For AWS protection, Sysdig Secure will check the following sections:3.1.1, 3.1.2, 3.1.3, 3.3.1, 3.3.2, 3.3.7, 3.5.7, 3.5.8, 3.14.6, 3.14.7

    September 2, 2021

    New Terraform Onboarding Options for Secure for cloud

    Users can now onboard Sysdig Secure for cloud with their AWS accounts (single or organizational) using Terraform. See the feature description and the deployment/onboarding instructions.

    August 12, 2021

    Inline Scanner 2.4.6 Released

    Version 2.4.6 of the inline scanner container has been released. See also: Integrate with CI/CD Tools.


    • Added support for images with the (deprecated) manifest schema V1

    July 30, 2021

    Inline Scanner 2.4.5 released

    Version 2.4.5 of the inline scanner container has been released. See also: Integrate with CI/CD Tools.


    • Fixed an edge case in which using the --verbose flag with --format json caused a corrupted JSON output

    July 28, 2021

    Inline Scanner v2.4.4 Released

    Version 2.4.4 of the inline scanner container has been released. See also: Integrate with CI/CD Tools.


    • Bumped ClamAV version to latest (0.103.3).

    • Updated base image to get updated security fixes (July 2021)

    • Added retry mechanism when pulling images from registries

    • Added --write-json PATH option to permit storing json log to file

    • Fixed Malware scan fails when image has not read the permissions on files

    • Fixed failure in getting images for registries that do not support tag listing

    July 27, 2021

    Admission Controller with Kubernetes Audit (k8s_audit Falco rules)

    Today we announce the general availability of the Kubernetes Audit functionality as part of the Sysdig Secure Admission Controller.


    Kubernetes admission controllers provide operators the ability to validate and/or mutate incoming API requests. Admission controllers are a core functionality of Kubernetes, and many are enabled by default.

    Sysdig Secure has long provided Kubernetes API security using k8s_audit Falco rules to create policies against Kubernetes audit logs. However, there have been some complications:

    • Diverse setup requirements:

      Many Kubernetes distros are opinionated in the way to collect and access logs, some using dynamic backends (deprecated in Kubernetes 1.19, but still available in OCP up to 4.3), while more vanilla approaches use webhooks, and cloud providers require a bridge to collect logs via their own logging streams.

    • Distros diverging from Falco:

      With OCP 4.4+, we had no clear way to collect and validate audit logs against our Falco rules.

    The Solution?

    Tap directly in the Kubernetes API request via Admission Controllers and use the existing k8s_audit rules our customers have relied on for so long. See the installation instructions.

    July 2, 2021

    Inline Scanner 2.4.3 Released


    • Updated base image to get updated security fixes (June 2021).


    • Fixed incorrect version detection for Apache Struts 2 packages which was leading to false positives.

    July 1, 2021

    Node Image Analyzer v0.1.13 Released

    Version 0.1.13 of the Node Image Analyzer has been released.

    This release comes with the following improvements:


    • Fixed a GKE- and ContainerID-specific bug where the node image analyzer couldn’t scan the image due to missing blobs

    • Implemented a few-second pause at startup to allow for Istio sidecars to complete the initialization before creating connections


    • We use the Universal Base Image (UBI) Sysdig-approved image as the base, in order to ensure the highest patch level approved by our security team.

    June 23, 2021

    Enhancements to Compliance Module

    Terminology note: Compliance standards are scoped to different platforms depending on the specific security rules they include, Broadly, these are divided into:

    • Workload types: Including any Falco rules for kernel system calls, Falco rules for Kubernetes audit logs, host benchmarks, and security features that affect hosts, containers, and kubernetes clusters

    • AWS/cloud type: Falco rules for CloudTrail and Cloud Custodian rules on Amazon Web Services

    See also: Compliance.

    Extended Existing Compliance Standards to AWS

    For the following existing compliance standards, we have added rules for AWS cloud provider:

    • NIST 800-53 rev4 for AWS

    • NIST 800-53 rev5 for AWS

    • ISO 27001:2013 for AWS

    • SOC2 for AWS

    • HIPAA for AWS

    Added New Compliance Standards

    We have also added the following new compliance standards to Sysdig Secure’s offerings:

    • GDPR for AWS 

    • GDPR for workload

    • NIST 800-190 for workload

    Trimmed Excess Rules from Some Standards

    Certain rules have been re-evaluated and were removed because they did not significantly contribute to the security posture:

    • Logged in without Using MFA (merged with Console Login Without MFA)

    • Interpreted procs outbound network activity

    • Launch Suspicious Network Tool in Container

    • All K8s Audit Events

    June 14, 2021

    CIS RedHat OpenShift Container Platform v4 Benchmark

    Support for CIS RedHat OpenShift Container Platform v4 Benchmark has been added to Sysdig Secure.

    As part of this release Sysdig is allowing you to scan and validate compliance with 112 controls included in the CIS Bencmark requirements.

    See also: Benchmarks

    June 9, 2021

    Sysdig Secure UX Improvements: “Investigate” Navigation & Activity Audit

    Sysdig navigation just got a facelift. To help our Sysdig Secure users navigate easily, we:

    • Added the new menu item Network (previously found under the Policies menu), and

    • Grouped Activity Audit + Captures into Investigation to better describe the use-case it helps users resolve.

    Activity Audit

    The Activity Audit module also got several interface and user experience improvements:

    • Runtime scope moved to the top to align with other Secure interfaces and allow more space for activity data

    • Activity types (network, file, kubectl, command) can now be filtered directly from the graph using the legend

    • Attributes of the displayed elements can be filtered directly from the list, without displaying the side detail panel

    June 4, 2021

    Kubernetes Network Security: New Configuration and Improved User Experience

    Sysdig’s Kubernetes Network Policy tool has been updated to include additional fine-tuning configurations and an improved user experience.

    Additional Configuration Panel

    • Workload Labels: Depending on your workload labelling policy, some labels may not be relevant for generating a KNP policy. Use the additional config to include/exclude a particular set of labels per cluster/namespace to declutter your UI and the resulting policy.

    • Unresolved IP Configuration: Now it is possible to label raw IPs that are not mapping to your Kubernetes/OpenShift entities, i.e. external cloud provider services, so these labels will be automatically applied to the topology and ingress / egress tables.

    • Cluster CIDR configuration: If the CIDR configuration is not automatically detected by the agent, you can now directly configure internal subnets per cluster using the Sysdig interface.

    Improved UX

    • Topology map: Additional information pop-up when hovering over a network connection or a network node, such as server process, source, destination, and more.

    • Unresolved IP filtering: In the ingress and egress tables, by type or using free text search.

    Additionally, Network is now presented as a top-level item in the Sysdig Secure navigation.

    May 27, 2021

    Falco Policy Tuner - Beta

    Sysdig is now releasing a managed version of the standalone Falco Tuner.

    Previously, you had to run the tuner in your local environment, print suggestions, and manually update a rule with those suggestions. The new feature runs in the background and automatically tunes noisy rules and false positives. To streamline the creation of these exceptions, we’ve created a new object within Falco called exceptions.

    Note: To enable the tuner, Admin access rights to Sysdig Secure are required.

    Feature Enhancement: Falco Exceptions

    Previously, exceptions were created using and not conditions inside a Falco rule, e.g.

    - rule: Write below binary dir
      condition: >
        bin_dir and evt.dir = < and open_write
        and not package_mgmt_procs
        and not exe_running_docker_save
        and not python_running_get_pip
        and not python_running_ms_oms
        and not user_known_write_below_binary_dir_activities

    However, this process can be unwieldy and can result in unintended behavior. The new format, using exceptions, looks like this:

    - rule: Write below binary dir
      condition: bin_dir and evt.dir = < and open_write
        - name: package_mgmt_procs
          comps: in
          values: package_mgmt_binaries # list of known binaries

    See the full documentation here.

    May 19, 2021

    Regulatory Compliance for ISO27001:2013 and HIPAA Now Available

    Two new compliance standards have been added to Sysdig Secure’s compliance feature:

    See also:Compliance for information about the specific controls Sysdig covers for each security standard.

    Inline Scanner v2.4.1 Released

    Version 2.4.1 of the inline scanner container has been released. See also: Integrate with CI/CD Tools.


    • Updated ClamAV version to 0.103.2 to avoid end-of-life problems present in the former version, such as failure in updating the antivirus database

    Additional type Descriptor Forwarding Activity Audit through Event Forwarder

    The JSON payload when sending Activity Audit elements through the Event Forwarder will now contain an additional field name: type. This describes the type of the entry, respectively: command, connection, fileaccess, or kubernetes.

    See also: Event Forwarding.

    May 18, 2021

    New and Improved Host OS and Container Scanning Tools

    We at Sysdig are working hard to improve your security posture and compliance experience. As part of this commitment we are implementing a new framework to generate host benchmark results, introducing host scanning, and making backend improvements to the image scanning mechanism.

    Installation Steps

    The new features require a new component to be installed called the Node Analyzer. We’ve provided an installation script to automate the installation or to upgrade an existing Node Image Analyzer daemonset, if applicable.

    Once you’ve installed or updated the components, the UI will automatically show Host Scanning and new Benchmarks functionality (Legacy Benchmarks can still be accessed.)

    Host Scanning: New

    In addition to Sysdig Secure’s rich array of tools for scanning container images, you can now scan the hosts as well.

    • Scan hosts for vulnerabilities, and detailed Software Bill of Materials (SBoM)

    • Support for OS (e.g. rpm) and non-OS (e.g. Java, Ruby, Python) packages

    • Compare and diff scan results

    Host Benchmarks: Updated

    • More checks

    • Better results

    • Clustered aggregations - understand the posture of your environments, not just a single entity

    Image Scanning: Updated

    • Automatically scan images if they have not been scanned

    April 29, 2021

    New Scan Results Page Layout

    We have reorganized the visual layout of the Scan Results summaries to clearly distinguish policy evaluation from vulnerability matching and to better summarize the information.

    Improvements include:

    • Vulnerabilities and Policies are now two different sections in the UI

    • Vulnerability match update time is displayed to further distinguish from the Policy Evaluation time

    • Policy breakdown is collapsed by default to reduce cognitive load

    • Re-evaluate policies button is now located in the impacted section only, as opposed to whole page

    • Apart from the vulnerability update time, the data remains unchanged from previous versions

    See also: Review Scan Results.

    April 26, 2021

    Inline Scanner v2.4.0 Released

    Version 2.4.0 of the inline scanner container has been released. See also: Integrate with CI/CD Tools.


    • Updated base image to get updated security fixes.


    • Added HTTP_PROXY and HTTPS_PROXY environment variables support for malware scanning mode. This is required if you want to retrieve the malware database inline behind a proxy.

    • Added support for.dockercfgrepository auth method, accessible via the--registry-auth-dockercfgCLI flag.


    • Now using HTTP1.1 by default to bypass a cURL bug.

    • Provided fix for an error when using the docker-daemon storage type with a docker UID different than 1000.

    March 30, 2021

    Sysdig Secure for cloud

    Sysdig Secure for cloud is available with Cloud Risk Insights for AWS, Cloud Security Posture Management based on Cloud Custodian for AWS and multi-cloud threat detection for AWS using Falco.

    What’s Included in this release:

    • Insights: a powerful new visualization tool for threat detection, investigation, and risk prioritization, to help identify compliance anomalies and ongoing threats to your environment. With Insights, all findings generated by Sysdig across both workload and cloud environments are aggregated into a visual platform that streamlines threat detection and forensic analysis.

    • Threat Detection based on AWS CloudTrail: To detect threats, anomalies and suspicious activities with the flexible Falco engine. See also: Sept 29, 2020.

    • Cloud Security Posture Management with AWS Benchmarks: The AWS CIS Benchmarks assessment evaluates your AWS services  against the benchmark requirements and  returns the results and remediation activities you need to fix misconfigurations in your cloud environment.

      We’ve included several UI improvements to provide additional details such as:  control descriptions, affected resources, failing assets, and guided remediation steps, both manual and CLI-based.

    • Image Scanning for ECR and Fargate: one-click deployment– see also ECR April 13, 2020 and Fargate Sept. 28, 2020.

    Free-Forever Cloud Security Tier

    Sysdig is launching a new Free-forever cloud security tier for one single account.

    • Easy onboarding in minutes

    • Manage cloud posture with a daily run of CIS Benchmarks

    • Detect threats with out-of-the-box CloudTrail detection rules based on Falco

    • Scan containers (ECR/Fargate scanning) automatically and within your cloud environment for upto 250 images a month

    March 24, 2021

    Image Scanning Reports v3 [BETA]

    The Image Scanning Reports feature has been thoroughly updated and has moved from a synchronous model to an asynchronous mode, in which you schedule the reports you need and then receive them through your normal notification channels (email, Slack, webhook.). The new version also includes:

    • A preview function to check report structure in the UI

    • A more advanced query builder

    • Extended set of data columns (i.e. CVSS base score and vector) and extended set of available filters (i.e. package type)

    Reporting v3 supports two different types or reports:

    • Vulnerability report: Containing vulnerability, package and image data

      I.e. Vulnerabilities in my runtime with Severity ≥ High, a Fix available and not included in a vuln exception list.

    • Policy report: Containing scanning policies and evaluated images data

      I.e. Images in my internal registry failing the “NIST” scanning policy.

    You need to enable this feature from the Sysdig Labs setting on the User Profile page.

    See Scheduled Reports for more detail.

    March 22, 2021

    Feature Enhancement: Falco Policy Types

    Sysdig Secure has introduced Policy Types– a separation of policies into logical groups, based on the sources used in the policy engine. When creating a policy, you choose a type and then only the relevant scopes and container actions will be presented. 

    We have also introduced a new policy type to support threat detection with AWS CloudTrail rules.

    For full details, see Manage Policies.

    March 17, 2021

    Scan Results: UX Enhancements & Added Functionality

    Scan Results List

    Summarized views based on image count, image fail / pass distribution and image origin distribution.

    • Registry filter dropdown, multi-select

    • Visible image counters: Images shown in the page vs total number of images available after applying filters

    • Visual charts: Pass/fail and origin distribution (also respecting filters)

    Vulnerability List:

    New table design to offer additional visual feedback and reduce data redundancy, plus additional vulnerability data.

    New functionality:

    • Individual vulnerabilities can now be clicked to display additional information in a side panel:

      • The vulnerability feed source that was used for the matching

      • A description of the vulnerability

    March 15, 2021

    Sysdig Serverless Agent 1.0.0 for Fargate ECS

    The “container-as-a-service” serverless environment calls for new agent models, and Sysdig provides them. Whereas in ECS, users still manage the underlying instances, with AWS Fargate the host is never visible and users simply run their workloads. And while this model is convenient, it can introduce risk as many people leave the containers unattended, without monitoring security events within that can exfiltrate secrets, compromise business data, impact performance, and increase their AWS costs. In addition, it is not possible to install a standard agent in an environment where you do not have access to a host.

    For these reasons, Sysdig has introduced a new “serverless agent” model that can be deployed in these container-based cloud environments. The first implementation is for Fargate (ECS).

    Sysdig will be rolling out security features on the serverless agent over time. In v1.0.0, users will see:

    • Runtime Policies and Rules

    • Secure Events

    To obtain secure event information and the associated Falco policies and rules in the Sysdig Secure UI from a Fargate environment, users install the serverless agent using a CloudFormation Template. Then log in to Sysdig Secure and review the events in the UI.

    See also: AWS Fargate Serverless Agents and Serverless Agent Release Notes (for future updates).

    March 12, 2021

    Deprecation Notice: Legacy Commands Audit & Legacy Policy events

    • The “Commands Audit” feature was deprecated in favor of Activity Audit in November 2019. This feature will be completely removed from the SaaS product April 2021 (next month).

      Sysdig agent version 0.93+, released in November 2019, is required by the Activity Audit feature.

    • The “Policy Events” feature was deprecated in favor of the new Events feed in June 2020. This feature will be completely removed from the SaaS product April 2021 (next month).

      Sysdig agent version 10.3.0+ is recommended.

    UI Improvement on Rules Library and Rule Details

    Usability improvements that display the policies in which a rule is used, from both the Rules Library list and the Rule Detail view. See Manage Rules for details.

    March 2, 2021

    Regulatory Compliance for SOC 2, NIST 800-53 rev4 and rev5

    Three new compliance standards have been added to Sysdig compliance feature: SOC 2, NIST 800-53 rev4 and NIST 800-53 rev5.

    The compliance validator now also includes new checks for the following features: Admission Controller, Network Security Policies and Node Analyzer.

    See the Compliance documentation for usage details and the controls implemented.

    February 23, 2021

    Windows Scanning Released

    A beta version of the Windows Scanning Inspector has been released. This is a new feature from Sysdig for scanning Windows containers.

    This is a standalone scanning engine. There is no centralized UI, management, or historical data. These features are planned for a future release.

    See also: Windows Container Image Scanning [BETA].


    • Identify Windows container image vulnerabilities from:

      • Windows OS CVEs
    • Windows or Linux hosts

    • Reports in JSON and PDF

    • Policy support

      • Severity

      • Fix available

      • Days since fixed

    UI-Based Admission Controller Released

    Kubernetes' admission controllers help you define and customize which requests are allowed on your cluster. An admission controller intercepts and processes requests to the Kubernetes API prior to persistence of the object, but after the request is authenticated and authorized.

    Sysdig’s Admission Controller (UI-based) builds upon Kubernetes and enhances the capacity of the image scanner to check images for Common Vulnerabilities and Exposures (CVEs), misconfigurations, outdated images, etc., elevating the scan policies from detection to actual prevention. Container images that do not fulfill the configured admission policies will be rejected from the cluster before being assigned to a node and allowed to run.

    See also: Admission Controller.

    Main Features

    • Granular admission policies: Defining a global policy per cluster, but also at the level of particular namespaces or image paths (i.e. registries) Registry and repository whitelist

    • Only allow images that pass the scanning evaluation criteria

    • Only allow images that have been evaluated recently

    • Only allow images that have been scanned before creation is requested to Kubernetes

    • Registry and repository whitelist

    • Scan unscanned requested images immediately (optional)

    February 20, 2021

    Network Micro-Segmentation: Support for CronJobs, Weave, & Cilium CNIs

    The Sysdig Network Security Policy Tool has been upgraded to add support for CronJob pod Owners.

    With the addition of CronJob support, communication is aggregated to the CronJob (scheduler) level, rather than the Job. Therefore, when administrators review the activity in the Network Security Policy menu, they will see the higher-level CronJobs listed, and not an excess number of individual Job entries.

    This update also adds support for Weave and Cilium CNIs on top of Calico support.

    Malware Detection during Inline Image Analysis

    As part of the inline scanner version 2.3.1 release, malware scanning was added as a configurable detection that can be performed during inline analysis.

    The default behavior if this feature is enabled and malware is found is to consider the scanning failed, report malware details, and abort analysis:

    See Perform Inline Malware Scanning for recommended parameters and output options.

    February 16, 2021

    Registry Credentials: Support for Multiple Credentials

    Sysdig Secure now supports assigning multiple credentials to the same registry depending on the relative internal registry path that is used to pull the image.

    A wildcard can be added to the end of the path, indicating that any image located under the partial path inside the registry (/rg-2-1er in the example) will use the registry credentials configured here. This additional flexibility is useful, for example, for IBM registries which can have a different set of permissions depending on the namespace.

    See also: Manage Registry Credentials.

    February 10, 2021

    Inline Scanner v2.3 Released

    Version 2.3 of the Inline Scanner has been released.


    • Avoid prefixing the image names with localbuild when not strictly necessary


    • Improved version detection for specific software packages: logback, SpringFramework and Tomcat Java

    • Allow setting of openssl security level via OPENSSL_SECLEVEL env var to support old certificates

    • More robust image ID identifier, avoiding unnecessary image re-scans along the container lifecycle

    • Added malware detection feature

    February 4, 2021

    Enhanced Activity Audit Filters

    We have improved the noise-reduction filter for the Activity Audit feature in Sysdig Secure. The feed will now automatically filter out duplicate entries with a high number of occurrences. No information is lost, as the filtered noise is only duplications of entries in the feed.

    A sudden reduction in the number of Activity Audit entries per time slot is expected as a result of this filter.

    January 28, 2021

    Node Image Analyzer v0.1.9 Released

    Version 0.1.9 of the Node Image Analyzer has been released.

    This release comes with the following improvements:


    • Fixed an issue that prevented some images from being processed on GKE clusters using Docker and Containerd

    • Fixed an issue that prevented some images that don’t have full tags from being processed on OpenShift

    • Improved version detection for Logback, SpringFramework and Tomcat Java packages

    • Fixed an issue that resulted in the image analyzer crashing without a proper error message when an incorrect Docker socket path was provided


    December 23, 2020

    Sysdig Secure Jenkins Plugin v 2.1 Released

    Version 2.1 of the Sysdig Secure Jenkins Plugin has been released!


    • Sysdig Jenkins Plugin 2.1 leverages the inline scanner v2 under the hood, which improves the scanning performance and execution times.

    • This version also introduces proxy support for both master and worker nodes.

    See also: Integrate with CI/CD Tools and Integrate with Jenkins.

    December 16, 2020

    Node Image Analyzer v 0.1.7 Released

    Version 0.1.7 of the Node Image Analyzer has been released.

    This release fixes image analysis errors for OpenShift clusters configured in FIPS mode.

    See also: Scan Running Images

    Statement RE: Solarwinds and Sysdig’s Security

    We have seen requests for statements regarding tooling in the wake of the Solarwinds and related compromises. Sysdig does not use these tools internally. To maintain a secure SDLC process for own product we use Sysdig Secure as well as source code analysis tools. We also maintain our own branch of key OSS components to ensure software is fully vetted before it’s delivered to customers.

    December 14, 2020

    Perform Image Scanning as a GitHub Action

    A new version of the Sysdig Secure inline scanning action has been released. This Github action allows you to perform image analysis on locally built container images.

    The action uses the new secure-inline-scan 2.x, which provides better performance and more input options. See Inline Scan 2.2 Release Note.

    The action provides the following benefits:

    • Image evaluation results can be consumed using the Sysdig Secure UI or locally as check-run annotations.

    • Support for SARIF report output.

      This provides native integration with Github’s code scanning, for example: executing the codeql-action/upload-sarif action.

    See also: Inline Scanning.

    December 11, 2020

    New Runtime Policy Events JSON Format

    The JSON format for the runtime policy events has been upgraded to include full scope information, rule labels, and a single-line representation for the event field’s keys and values.

    To preserve backwards compatibility with existing integrations, the former JSON format is still available (and used by default on migration).

    From the Event Forwarder page, under “Data to Send,” the old JSON format is labeled “Policy Events (Legacy)” and the new one as “Runtime Policy Events.”

    See also: Event Forwarding.

    December 7, 2020

    Node Image Analyzer v 0.1.6 Released

    Version 0.1.6 of the Node Image Analyzer has been released.


    • Proxy configuration supportRunning Node Image Analyzer Behind a Proxy

    • Added support to scan images that lack a Repo tag, such as OpenShift 4.x distribution images.


    • Updated dependencies and base images to keep up with latest fixes

    December 2, 2020

    Inline Scanner v2.2

    Version 2.2 of the Inline Scanner has been released.


    • The vulnerability report information has been added to the container output, together with the image details and policy evaluation

    • When scanning an image using the digest pullstring, it will be stored using the truncated digest as a tag. For example:

      postgres@sha256:839d6212e7aadb9612fd216374279b72f494c9c4ec517b8e98d768ac9dd74a15 will show up in the interface as postgres:839d6212e7aa


    Fixed a permissions issue when running the container with a user other than root.

    See also: Integrate with CI/CD Tools.

    November 23, 2020

    Inline Scanner v2.1

    V2.1 of the inline scanner container has been released.

    New: Ability to analyze scratch-based images


    • Fixed a bug retrieving the PDF output for previously scanned images

    • Addressed several vulnerabilities found in the inline scanner container

    See also: Integrate with CI/CD Tools.

    November 19, 2020

    Kubernetes-Native Network Security with Sysdig Secure (Beta)

    A new feature has been added to Sysdig Secure for authoring and refining Kubernetes network policies (KNPs) that:

    • Automatically extracts the connection information, by observing the cluster networks and microservices communications

    • Offers a visual flow to fine-tune the Kubernetes network policies, incorporating the user’s adjustments

    • Automatically generates the KNP YAML to be applied, without requiring previous Kubernetes policy knowledge from the user.

    As soon as the feature is enabled, the Sysdig agent starts collecting and processing application communications, which are then enriched using Kubernetes metadata and presented in two different ways:

    • Topology maps: a visual representation of the network flow between the Kubernetes entities (Services, Deployments, StatefulSets, DaemonSets, Jobs)

    • Ingress / Egress tables: for additional detail on each inbound/outbound communication and policy tuning.

    Once the user has finished editing the desired policy, Sysdig will automatically compute the associated KNP YAML:

    • Enforcement is delegated to the Kubernetes control plane, favoring policy-as-code and avoiding direct tampering with cluster communications

    • Allow-only approach ensures that any communication which is not explicitly allowed by the policy will be forbidden


    Sysdig agent version 10.7+

    Supported Orchestrator Distributions and CNI Plugins:

    • Vanilla Kubernetes (kops, kube-admin) using Calico

    • OpenShift 4.x using OVS

    • Google GKE using Calico

    • Amazon EKS using Calico

    • Rancher Kubernetes using Calico

    Please contact us to enable this feature for your Sysdig Secure accounts.

    See also: Network Security Policy Tool .

    November 13, 2020

    Terraform Provider Update (v0.5.4)

    Terraform v0.5.4 update is available in Sysdig Labs.

    The following minor bug fixes are included:

    • sysdig_secure_policy resource can configure the response action Kill Container

    • Fixed severity field in sysdig_secure_policy resource, to accept all possible values

    October 29,2020

    Scan Results List Updated

    The UI for the list of scanned images has been updated to include several functionality and design improvements:

    • Status column (Passed or Failed) is now filterable

    • Image Origin (Inline Scanner, Node image analyzer, etc.) is now visible, filterable, and has multi-select option

    • Image registry is now visible on the table

    • Ability to sort by date-added (default) or image name

    • Flexible free-text search: filter by registry/repo:tag, repo:tag, repo, etc.

    See also: Review Scan Results.

    October 26, 2020

    Inline Scanner 2.0

    A new version of the Sysdig inline scanner script has been released.

    Major improvements:

    • The inline analysis container doesn’t need to spawn any additional containers

      • This removes the requirement for the Docker client, docker-in-docker, etc.

      • This enables usage in environments where docker-in-docker is not feasible or hard to instrument (e.g., Tekton).

    • Additional analysis workflows and formats:

      • Added support to analyze a docker archive

        • A .tar.gz file containing the image, i.e. the output from a “docker save”

        • Example execution

      • Added support to analyze OCI images (both and directory and archive)

      • Added support to retrieve an image from the container storage (CRI-O and others)

    Additional improvements:

    • Faster image ingestion

    • More verbose logs available for troubleshooting and diagnosis

    • Machine-readable JSON output via --format JSON command

    To upgrade an earlier Sysdig Inline Scanning version to 2.0, you need to take into account the new invocation parameters, which are not backward compatible.

    Sysdig Inline scanner can be used stand-alone or as a step inside a CI/CD pipeline (Jenkins, Tekton, CircleCI, etc). In the upcoming weeks, we will update the different integrations to provide out-of-the-box support for the 2.0 version.

    October 22, 2020

    Forwarding the Activity Audit Information

    The Sysdig Secure Event Forwarder has added support to forward Activity Audit data to external platforms.

    Benchmarks support for Kubernetes Benchmark 1.6

    • Kubernetes Bench upgraded to version 1.6

    • Using the Kubernetes benchmark, we now provide customer-selected benchmark checks for GKE and EKS (rather than just the Kubernetes default).

    October 9, 2020

    Regulatory Compliance Control Validation & PCI Checks

    A new feature has been added to Sysdig Secure for checking controls from various compliance standards. For the first release, we provide checks against specific controls in PCI 3.2. Future releases will include SOC2, NIST-800-53, and more. See also: Compliance in Sysdig documentation.

    Compliance Validator and Reports

    The validator checks many Sysdig Secure features, including: image scanning policies, Falco runtime policies and rules, scheduled benchmark testing, Admission Controller, Network Security Policies, Node Image Analyzer, and more. Over time we will add new compliance coverage.

    Disclaimer: Sysdig cannot check all controls within a framework, such as those related to physical security.

    This feature is a beta release. A Sysdig Secure admin must enable it from the Sysdig Labs interface under Settings.

    PCI Control Details

    The PCI Quick Reference describes the full range of controls required to pass a PCI 3.2 audit. In this release, Sysdig Secure will check the following subset:

    Controls 1.1.2, 1.1.3, 1.1.6.b, 2.2, 2.2.1, 2.2.2, 2.2.a, 2.4, 2.6, 4.1, 6.1, 6.2, 6.4.2, 6.5.1, 6.5.6, 6.5.8, 7.1.2, 7.2.3, 10.1, 10.2, 10.2.1, 10.2.2, 10.2.3, 10.2.6, 10.2.7, 10.3, 10.5.5, 10.6.1, 11.4, 11.5.a, 11.5.b.

    October 2, 2020

    Event Forwarding: Kafka and Webhook Added

    Two new supported integrations have been added to the Sysdig Secure Event Forwarder:

    The Kafka topic integration includes support for:

    • Multiple Kafka brokers

    • Partitioner/Balancer algorithms: Murmur2, Round robin, Least bytes, Hash, CRC32

    • Compression algorithms: LZ4, Snappy, Gzip, Zstandard

    The Webhook integration includes support for:

    • Authentication methods: Basic authentication, Bearer Token, and Signature Header

    • Custom headers defined by the user to accommodate any additional parameter required on the receiving end

    September 29, 2020

    Vulnerability Exceptions Handling Enhanced

    The Vulnerability Exceptions feature in Sysdig Secure has been redesigned and enhanced.

    It now offers:

    • Additional vulnerability and feed context

    • Precise mapping between images and their associated exceptions

    • A better exception management lifecycle

    • Multiple vulnerability lists, which can be flexibly assigned to different image sets (or just a particular image), using the scanning policy assignments

    • Additional information displayed to improve team awareness and security context

      • Vulnerability description

      • User-defined notes

      • Vulnerability feed info, with severities and links as provided per feed

    • Configurable expiration dates:

      • An exception is automatically disabled when the expiration date is met

      • Day resolution, all times relative to 0:00 UTC

    • Enhanced workflow integration with the “Scan results” page for an individual image, with the ability to quickly append a flagged vulnerability to a list.

    Migration: The exception and evaluation behavior in the current environment will be maintained after the feature upgrade. In particular:

    • Pre-existing vulnerability exceptions will be migrated to the “Default exceptions list”

    • The “Default exceptions list” will be assigned to every pre-existing policy assignment

    • All the pre-existing vulnerability exceptions expiration date will be set to “Never."

    See also: Manage Vulnerability Exceptions and Global Lists.

    AWS Threat Detection using CloudTrail and Sysdig Secure

    Sysdig is happy to announce the general availability of a CloudFormation Template that will deploy a cloud-native operational security engine. By leveraging AWS CloudTrail and the Falco language, you can detect any unexpected or unwanted behavior in your AWS accounts.

    Sysdig Cloud Connector leverages AWS CloudTrail as the source of truth for enabling governance, compliance, operational auditing, and risk auditing for your AWS account.

    Every API action over your infrastructure resources is recorded as a set of CloudTrail entries. Once the integration is deployed in your infrastructure, the Sysdig Cloud Connector can analyze these entries in real-time and provide AWS threat detection by filtering them against a flexible set of security rules.

    Example detection rules included in this release:

    • Attach a user to an Administrator Policy

    • Create an HTTP Target Group without SSL

    • Deactivate MFA for user access

    • Delete S3 bucket encryption

    Sysdig Cloud Connector provides several notification options, including sending security findings to AWS CloudWatch and AWS Security Hub. When configured, you can consume the security events without leaving your cloud console.

    See also:

    September 28, 2020

    Automated Fargate Image Scanning

    Sysdig is pleased to announce the general availability of a new integration leveraging the Sysdig Inline Scanning capabilities to automatically analyze the base images used for any task created using AWS Elastic Container Service (ECS or Fargate).

    • Straightforward deployment using a CloudFormation template

      The only mandatory parameter is the Sysdig API token.

    • Inline scanning living inside your AWS account means improved security:

      • No need to expose or configure private AWS registries

      • Only image metadata is sent to Sysdig Secure, not the actual image contents

      • No sensitive information ever leaves your AWS account

      • An ephemeral task will be spawned to analyze each discovered images, in parallel

    • Each time you deploy a new task in AWS ECS/Fargate, an EventBridge event will be triggered and a lambda function will parse which images need to be analyzed by the CodeBuild pipeline job.

      • Fully automated

      • Scan results and scanning policies are still controlled from a single security governance point using Sysdig Secure

    Node Image Analyzer Version 0.1.3

    This version adds support for running the node image analyzer in Kubernetes environments with containerd, such as Google Kubernetes Engine configured with cos_containerd. See also: Scan Running Images.

    July 29, 2020

    Replacing RHSA Advisories with CVE Advisories

    In new images scanned, RHSA advisories will be replaced with CVE advisories. The results for existing images will be updated in the background over the next week.

    This change provides better matches for CVEs that are not yet fixed or will not be fixed since those do not yet have RHSAs. It also makes the CVE the match key rather than RHSA for more consistent whitelisting and policy handling compared to other distros.

    Scanning Adapter Available for Harbor

    The Sysdig Secure Harbor Scanner Adapter enables Harbor to use Sysdig Secure scanning engine to analyze the container images managed by the platform.

    Harbor integration showing the Interrogation Servicespage.

    This adapter also provides a service that translates the Harbor scanning API requests into Sysdig Secure API calls, allowing Harbor to retrieve vulnerability reports and additional information from the scanning adapter. This will be presented transparently in the Harbor UI to the user.

    The scanning adapter supports two operation modes:

    • Backend Scanning: Image scanning happens in the Sysdig Secure backend

    • Inline Scanning: Image scanning happens in the infrastructure where Harbor is hosted

    To learn more about this integration, read the documentation.

    July 28, 2020

    Captures Filter on the Policies Page

    Policies can now be filtered to display if a capture is associated with an active or inactive policy.

    Image Exclusion on Policy Events

    Users often want to tune policy events. We’ve added a button on the event detail that will add an exclusion to a specific container.image.repo for the policy that triggered the event. Once that exclusion is applied to the scope, policies will no longer fire for that container.image.repo.

    July 26, 2020

    Sysdig Essentials

    We have introduced a new product tier, Sysdig Essentials. This tier includes everything required to achieve the five essential requirements for practicing Secure DevOps:

    • Image Scanning

    • Runtime Security

    • Compliance

    • Kubernetes and container monitoring

    • Application and cloud service monitoring

    To learn more about Essentials, register for our webinar, Deploy Faster by Automating Container Security, Monitoring and Compliance.

    With the introduction of Essentials, It’s also easier to get started with a trial program and manage your Sysdig subscription.

    Learn the difference between Essentials and Enterprise, including pricing and features, at Pricing.

    Sysdig Platform Enhancements

    SAML Single Sign-On

    The initial email to the following types of users will take them directly to the Single-Sign-On URL, and not the registration page.

    • SAML SSO Users

    • The users that are invited to the platform (as opposed to having them automatically created via Sysdig on-demand provisioning for SSO)

    Earlier, landing on the registration page was confusing to users because they had to set up their initial password.

    Rebranded Login Page

    The login page has been updated with the Sysdig Kraken and the new logo.

    June 29, 2020

    New Sysdig Secure Overview Page

    The Sysdig Secure Overview provides an at-a-glance view of the critical areas of your security posture.


    Panels can be scoped by Cluster or Namespace. The scope will update all panels that are displaying run-time data and the corresponding drill-down views.


    • Build Time - Images Scanned: Image scan results for all static image scans

      Drill-down - To Image Scanning Reports page.

    • Build Time - CVEs Found by Severity: The total number of CVEs present in each image scanned.

      Drill-down - Available in a future release

    • Run-time - Images Scanned: The pass/fail status of images running now and their trend over time.

      Drill-down - To Runtime Scanning Image page.

    • Run-time - CVEs by Severity: The total number of CVEs present in each running image

      Drill-down - Available in a future release

    • Run-time - Policy Events by Severity: The total number of policy events by severity.

      Drill-down - Secure Events page.

    • Benchmarks Tests Failing: The total number of benchmark tests that have failed.

      Drill-down - Benchmarks Results page.

    See also: Secure Overview .

    June 26, 2020

    Sysdig Secure’s Event Forwarder Now Supports IBM Cloud Pak for Multicloud Management and IBM QRadar

    IBM Cloud Pak for Multicloud Management centralizes visibility, governance, and automation for containerized workloads across clusters and clouds into a single dashboard.

    You can now forward security events to an IBM MCM instance by accessing the Settings > Event Forwarding menu and selecting IBM MCM from the dropdown:

    IBM QRadar Security Information and Event Management (SIEM) helps security teams accurately detect and prioritize threats across the enterprise and provides intelligent insights that enable teams to respond quickly to reduce the impact of incidents.

    You can now forward security events to an IBM QRadar instance by accessing the Settings > Event Forwarding menu and selecting IBM QRadar from the dropdown.

    See also: Event Forwarding.

    June 23, 2020

    Secure Events Feed Overhaul

    The Events feed in Sysdig Secure (formerly called Policy Events) has been redesigned, both visually and functionally.

    Apart from the styling and user experience improvements, these are the major new features and use cases

    Advanced Filtering

    We are deprecating the grouping/clustering of events present in the old version in favor of a much more powerful set of filtering capabilities:

    • Severity filters: Presented as quick buttons at the top, supporting multi-select

    • Attribute filters: Provide a simplified syntax to filter events by the attributes they contain. For example ruleType="Falco - Syscall" or image.repo!="sysdig/agent"

      • Open the event details side panel to find quick filtering widgets to include or exclude the attribute values associated with the displayed event
    • Event type selector: Supports runtime scanning alerts on top of policy runtime events (see section below), with an easy multi-selector in the UI.

    • Free text search: Allows you to search the event titles and scope label values. I.e. Terminal shell in or my-k8s-cluster.

    • New scope selector: Allows for additional selector logic (in, not in, contains, startswith, etc), improving the scoping flexibility over earlier versions. This scope selector also provides scope variables, allowing you to quickly switch between, for example, Kubernetes namespaces without having to edit the panel scope.

    All these filters can be combined additively to further refine your search.

    Multiple Event Types

    The new event feed displays not only the policy runtime events, but also runtime image scanning alerts.

    The backend architecture, filtering, and UX have been designed to accommodate additional types of security events that will be pushed to the Event Feed in the future, upgrading the interface from a policy-runtime-centric experience to a full security center control panel.

    Additional Event Details

    Policy runtime events: These now display the rule that was fired together with the rule labels. You can use the quick filters mentioned above to further refine the search.

    Richer scope: Every security event now displays all the scope labels retrieved for the event, not just those configured in the scope selector.

    See also: Secure Events.

    Additional Considerations/Limitations

    Events in the old and new format will be stored separately:

    • No event or event data will be lost during the transition

    • Events that were registered before the new feed is deployed can be browsed using the old feed interface, which is available from the burger menu in the top-right corner

    • Events that happen after the new feed is deployed will appear in the new event feed

    • Eventually, all events within the retention period will be present in the new interface, at which point the version switcher will disappear

    June 17, 2020

    The ordering of the side menu has been changed.

    Image Scanning Updates

    The image scanning navigation bar has changed.

    • The side menu is reorganized into Analyze and Configure sections

      • Analyze: Different areas of scanning that allow users to view scan results

      • Configure: The areas of scanning that involve the setup of the application

    • Whitelist terminology with CVEs has been removed.

      “CVE whitelist” is now CVE Exceptions.

    Team, Role, and Channel Updates

    A variety of enhancements have been added to the team, role, and notification channel options.

    Service Manager Role Added to Sysdig Secure

    RBAC capability was previously added to Sysdig Secure. (See also January 27, 2020 and User and Team Administration.)

    Now a new role, Service Manager, is also available in Secure. It has the same permissions as the Standard User, plus the ability to invite existing users to the team and manage the notifications channels assigned to the team. See Team-Based Roles and Privileges

    Configurable Default Team Role

    You can now define the default user role to apply when a new member is added to the team. The Admin can change this default on a per-team basis. See also: Create a Team.

    RBAC and Team Assignment for Notification Channels

    Previously, notification channels in Sysdig Secure and Monitor were treated as global entities, visible and editable for most users of the platform regardless of team configurations.

    We are enhancing the management and RBAC controls in the following ways:

    • Notification channels can now be “global” or limited to a particular team

    • Global channels can be managed by admins and can be viewed/used by other roles, while team-limited channels are available only to team members

    • Team Manager , Advanced User, and Service Manager (Secure) roles can create/update/delete team-scoped notification channels, they can also read and use the global ones

    • Standard and View Only roles can read team-limited and global notification channels

    • Admins will be able to create global notification channels and migrate channels from “global” to “team-limited”, and also from one team to another.

    See also: Set Up Notification Channels and the Share With field in each individual channel setting page.

    June 12, 2020

    CLI-Based Admission Controller for Image Scanning

    An additional tool for evaluating and admitting images is now available.

    Sysdig Admission Controller

    Sysdig’s Admission Controller (UI-based) combines the Sysdig Secure image scanner with a policy language to evaluate scan results and the admission context, providing great flexibility in the admission decision. It also provides the first line of defense against image-based security threats.

    By using Kubernetes API extensions to perform image scanning and other security checks on admission, we cover a major threat-prevention and hardening use case: “Only the images that are explicitly approved will be allowed to run on my cluster”.

    The admission decision relies not only on the image name and tag but also on additional context from the admission review, including namespace, pod metadata, etc.


    • Registry and repository whitelist / blacklist

    • Global and per-namespace admission configuration

    • Configurable pre-scan and post-scan behavior, i.e.:

      • Accept only the images that pass the scan (default)

      • Directly reject non-whitelisted registries / repos, without scanning

      • Accept the image even if it doesn’t pass the scan

      • Do not accept any image that hasn’t been scanned already

    • Pod mutation: image tag is replaced by digest to prevent TOCTOU (Time of Check, Time of Use) issue if the tag is updated between the scan and the pod scheduling


    • Helm 3

    • Kubernetes 1.15 or higher

    For more information, see Admission Controller .

    June 4, 2020

    New Vulnerability Feed Available: VulnDB

    We’ve added VulnDB as an additional 3rd-party vulnerability source to improve Sysdig’s coverage in non-OS package vulnerabilities.

    In addition, a new page is available for each VULNDB-linked advisory. It lists the CVEs and details about the Common Vulnerability Scoring System (CVSS) scores and external references.

    See also: Vulnerability Databases Used.

    May 11, 2020

    Optimized Runtime Page

    We’ve released a new Runtime page for the Image Scanning module within Sysdig Secure. Improvements include:

    • Filtering based on pass/fail/unscanned

    • The ability to search results for a specific image

    • Optimized queries to improve response times

    For more information, see Review Scan Results.

    April 20, 2020

    Added Automatic Image Scanning using Node Analyzer

    The (node) image analyzer (NIA) provides the capability to scan images as soon as they start running on hosts where the analyzer is installed. It is typically installed alongside the Sysdig agent container.

    This component was introduced to reduce dependencies on analyzing images within the Sysdig backend (SaaS or On-prem). Some advantages include:

    • Sharing credentials with the Sysdig backend in order to pull images is not required

    • Sharing the image content and potentially code with the Sysdig backend is not required; only metadata will be sent out

    • Opening a network route to allow the Sysdig backend to reach the user’s registries is not required

    If you have run the single line agent install with the –image-analyzer flag, then this component is already running in your infrastructure.

    The feature is available for Kubernetes environments.

    For more information, see Scan Running Images.

    April 13, 2020

    Added Image Scanning Integration Options

    Two new scanning integrations are available for CI/CD pipelines. Sysdig provides:

    • A reference implementation with Tekton Pipelines (prototype)

    • A fully supported integration with Amazon Elastic Container Registry (ECR) for triggering auto-scans from the registry

    Integrating Secure Image Scanning with Tekton Pipelines

    Tekton Pipelines allow you to implement CI/CD workflows using a highly modular, cloud-native approach that:

    • Uses containers as the building blocks for individual tasks

    • Runs directly on Kubernetes/OpenShift without requiring a dedicated infrastructure

    • Uses tasks that are purely declarative and described using their own CRD, making them easily composable and reusable

    Sysdig’s reference implementation details the prototype task to invoke Sysdig Secure image scanning as a pluggable step in your CI/CD pipeline with just a YAML file:

    Leveraging Tekton integration with the orchestration layer, you can retrieve the image scanning policy evaluation and state (pass/fail) directly from the logs of the task pod.

    Read the “Securing Tekton pipelines in OpenShift with Sysdig” blog post for additional details

    Integrating Secure Image Scanning with Amazon ECR

    Automatically scan images pushed to your Amazon Elastic Container Registry (ECR) using AWS-native technologies and Sysdig Secure.

    Sysdig image scanner integration is deployed as a CloudFormation template that listens to ECR registry events and uses AWS resources to streamline the image scanning process.

    • ECR itself will trigger the scan, no need for your CI/CD pipelines to actively pull from the registry

    • Deployed in a few clicks, you just provide basic configuration parameters such as the Sysdig API token or the Sysdig backend URL

    • No need to configure registry scanning credentials on the Sysdig Secure side

    This integration offers two different operation modes

    Inline scanning:

    • Scanning will be performed inside an AWS CodeBuild pipeline allocating ephemeral resources

    • No need to configure any registry credentials for Sysdig Secure

    • No need to expose your ECR registry to the Sysdig Secure backend

    • Sysdig Secure will not retrieve the image contents, only the metadata that is required to perform the policy evaluation

    Backend scanning:

    • Sysdig Secure will retrieve the full image contents in order to perform the scan

    • Your ECR registry must be reachable by the Sysdig Secure backend

    • Registry credentials are required, but they are pushed automatically by a lambda function, no need for manual configuration

    April 9, 2020

    Updates to Default Rules and Policies

    The following changes have been made to default Policies in Sysdig Secure, and to default Falco rules:

    • New rule tags added that map Falco rules to PCI and NIST controls

    • New default policies added specifically for PIC/NIST compliance

    • Tuning modifications for:

      • Write below etc

      • Write below root

      • Change thread namespace

      • Run shell untrusted

      • Detect outbound connections to common miner pool ports

    For more information, see also Falco Rules Changelog.

    April 7, 2020

    Updated Inline Scan Script

    • Added header values for import API for better supportability.

    • Upgraded to Anchore engine v0.6.1.

    • Use docker:dind instead of ubuntu for the base image. This reduces the image size and speeds up downloading.

    The latest version of the inline script will always be available at

    Link to repo for script source code:

    March 12, 2020

    New Get Started Page

    The Get Started page provides the key steps to ensure users are getting the most value out of Sysdig Secure. We’ll update this page with new steps as we add new features to Sysdig Secure. 

    The Get Started page also serves as a linking page for:

    • Documentation

    • Release Notes

    • The Sysdig Blog

    • Self-Paced Training

    • Support

    Users can access the page at any time by clicking the rocketship in the side menu.

    See also: Getting Started with Sysdig Secure.

    Linux CIS Benchmark Test Added

    Sysdig Agents can run the Independent Linux benchmark against the underlying host where the agent is installed. The Linux benchmark can be scheduled to run at a chosen interval in your environment and emits results and metrics about the status of the tests.

    Openshift Hardening Guide

    The Openshift hardening guide implements configuration checks run by the agent against Openshift environments.


    Note: This is supported for 3.x versions of Openshift. When Openshift releases a hardening guide for 4.x versions, we will update the configuration checks.

    Captures can be Routed to Specific Storage Locations

    As a user, you may have different S3 buckets where you’d like to store Sysdig captures, based on the environment where the policy event was triggered. New options are available for deciding what storage option you’d like to use for each policy event.

    Feeds Status Page Added

    It’s useful to understand the last time the feeds were updated, especially in self-hosted environments. The Feeds Status page shows the different vulnerability feeds we integrate with, their feed group (often the distro version), the time of the last sync, and how many CVE records are present in the feed group.

    See also: Feeds Status.

    March 5, 2020

    Inline Scanning Reporting Improvements and Documentation

    This script from SysdigLabs is useful for performing image analysis on locally built container images and posts. The only dependency for this script is access to docker-engine, Sysdig Secure endpoint (with the API token) and network connectivity to post image analysis results.

    Here are examples of using the inline scanner in different pipelines:

    PDF Reports from the Inline Scanner

    A new option

    -R  [optional] Download scan result pdf report

    will generate a PDF artifact that is available for developers to consume in the pipeline.

    February 6, 2020

    Data Retention Limits for Scan Results

    Use this feature to set limits on how long image scan metadata is stored, either by tags or days. This removes stale data and helps keep scan results easy to read.

    See Data Retention for details.Data Retention

    January 29, 2020

    Enhanced Kubernetes Audit Log Integration

    We’ve extended our test and documentation coverage for various Kubernetes audit log integrations. This integration enables Sysdig Secure to use Kubernetes audit log data for Falco rules, activity audit, and to test the impact of Pod Security Policies.

    We now have examples for:

    • OpenShift

    • Minishift

    • Kops

    • GKE

    • EKS

    • RKE

    • IKS

    • Minikube

    Read more here: Kubernetes Audit Logging.

    Vulnerability Scan Results Comparison

    In image scanning reports, the vulnerability comparison feature allows users to compare two different tags within the same repo to see which vulnerabilities are new or have been fixed in version X compared to version Y.

    This allows developers easily to compare the latest image to a previous version to easily report on which vulnerabilities have been addressed and which are new.

    See Review Vulnerability Summaries for details.Review Vulnerability Summaries

    January 28, 2020

    File Data Source Support for Activity Audit

    Sysdig Secure’s Activity Audit now supports a new data source element: File activity.

    Sysdig agent version 9.5.0+ is required to enable this new data source.

    • You can now filter the audit trail by file type or specific file attributes:

      • File name

      • Directory

      • Command (used to access the file)

      • Access mode

    • File activity is also visible in the time-series graph at the top (pink color):

    • Activity Audit will capture non-read file operations executed by interactive commands

    January 27, 2020

    RBAC Capability Available in Sysdig Secure

    The new role-based access control (RBAC) model available in Sysdig Secure allows you to define the access privileges granted to each user in a Sysdig Secure team.

    Besides the Admin role, which has full access and belongs to every team, there are four roles that can be assigned when adding a user to a team. (Note that the role names are the same in Monitor and Secure, but the privileges differ slightly. Users must be assigned Monitor team roles and Secure team roles separately.)

    • View Only: Read access to every Secure feature within the team scope. A View Only user cannot modify runtime policies, image scanning policies, or any other content.

    • Standard User: Can push container images to the scanning queue and view the image scanning reports. Standard Users can also display the runtime security events within the team scope. They cannot access the Benchmarks, Activity Audit. or Policy definition sections of the product.

    • Advanced User: Can access every Sysdig Secure feature within the team scope in read and write mode. Advanced Users can create, delete, or update runtime policies, image scanning policies or any other content. The Advanced User cannot manage other users.

    • Team Manager: Same permissions as the Advanced User + ability to add/delete team members or change team member permissions.

      Team Managers only have user administration rights within the specific team(s) for which they are designated Managers.

    See User and Team Administration for details.

    January 16, 2020

    Redesigned Captures Page

    The Captures function in Sysdig Secure has a new look and the following usability improvements:

    • Bulk deletion of capture files

    • Ability to see whether a capture was triggered manually or by a policy

    • Search across all capture files

    November 13, 2019

    Activity Audit (Beta)

    The Activity Audit in Sysdig Secure allows you to browse a live stream of activity from your Kubernetes containers and nodes. Audit takes the highly detailed data from syscalls and Kubernetes audit logs captured at the agent level, and makes it always-on, searchable, and indexed against your cloud-native assets.

    This stream includes executed commands, network activity, and kubectl exec requests to the Kubernetes API. The Activity Audit allows users to view different data sources in-depth for monitoring, troubleshooting, diagnostics, or to meet regulatory controls (SOC2, NIST, PCI, etc).

    Flexible filtering and scoping to help you focus on what’s relevant: Filters allow you to search, sort, and surface meaningful data and connections as they are needed. You can filter by data source type, data source attributes (like command name or Kubernetes user) and dynamic Kubernetes scope

    Automatically trace a kubectl exec session : The built-in trace functionality allows you to isolate and trace a kubectl exec access to a pod, automatically correlating the original Kubernetes user and IP that accessed the pod with the activity that was performed during the interactive session, including commands and network connections.

    Kubernetes Policy Advisor (Beta)

    With the Kubernetes Policy Advisor, Sysdig Secure auto-generates Pod Security Policies (PSPs) to significantly decrease the time spent configuring Kubernetes Policies. Strict security policies reduce risk, but can also break applications. Sysdig tests the impact of pod security policies through simulations, enabling teams to adjust misconfigurations before shifting to production. There are three main features that comprise the Kubernetes Policy Advisor:

    Auto generation: Sysdig Secure can parse any Kubernetes yaml file that includes a pod spec to generate a tailor-made PSP based on the configuration.

    Simulations: Start a simulation of the auto-generated PSP or any user-inputted PSP to see what pods would have been blocked from running if this PSP had been actively applied to the cluster.

    Events and tuning: Each pod/activity that would have violated the PSP will generate an event. Within the event details, users can see information about potential modifications they may need to make to the policy or the pod configuration.

    Image Scanning Improvement

    Support for images based on Google distro-less OS, including detection of base OS/version and installed OS dpkg packages.

    November 4, 2019

    Scanning Improvements

    New Scanning Rules

    File attributes can now be verified as part of the image scan analysis. A specific file can be validated against a node or sha256 hash.

    Scale Improvements to Scanning Reporting

    No query conditions are required as part of the Package and Policy Queries.

    October 10, 2019

    In-Line Scanning

    Images can now be analyzed locally before they are pushed to a registry. This has a couple key benefits to users.

    • Images can be analyzed before they’re pushed to a registry and reduce registry cost

    • Customers using the Sysdig Secure SaaS offering don’t need to expose their registry to our SaaS for images to be scanned

    • For openshift customers the in-lince scan option can be integrated into the S2I process to scan images without needing to expose a local cluster registry via a route

    Learn more and access the script here:

    Sysdig CLI

    The Sysdig CLI provides an easy way to interact with the cli via the command line. Read more here.


    Run it without parameters to get a list of all the commands.

    $ sdc-cli
    Usage: sdc-cli [OPTIONS] COMMAND [ARGS]...
      You can provide the monitor/secure tokens by the SDC_MONITOR_TOKEN and
      SDC_SECURE_TOKEN environment variables.
      -c, --config TEXT  Uses the provided file as a config file. If the config
                         file is not provided, it will be searched at
                         ~/.config/sdc-cli/config.yml and /etc/sdc-cli/config.yml.
      -e, --env TEXT     Uses a preconfigured environment in the config file. If
                         it's not provided, it will use the 'main' environment or
                         retrieve it from the env var SDC_ENV.
      --json             Output raw API JSON
      --version          Show the version and exit.
      --help             Show this message and exit.
      alert       Sysdig Monitor alert operations
      backup      Backup operations
      capture     Sysdig capture operations
      command     Sysdig Secure commands audit operations
      compliance  Sysdig Secure compliance operations
      dashboard   Sysdig Monitor dashboard operations
      event       Sysdig Monitor events operations
      policy      Sysdig Secure policy operations
      scanning    Scanning operations
      settings    Settings operations
      profile     Profile operations

    New Package Reports

    Package name/version are now grouped together to provide easy parsing of all CVE’s associated with a package and the images using that package.

    Sept 24, 2019

    New Trigger Parameters for CVSS Score

    Image Vulnerabilities can now be evaluated against their CVSS (Common Vulnerabilities Scoring System) score. If a vulnerability is =, <;>, <=, or >= to a specific score, then the rule can trigger a warn/stop action.

    Sept 18, 2019

    Time Ranges Updated

    The default time range options have been updated in Sysdig Secure.

    The default time ranges are now set to:

    • 10 Minutes 

    • 30 Minutes

    • 1 HR

    • 6 HRs

    • 1 Day

    • 3 Days

    To look at a custom window of time, use the manual time window.

    Sysdig Secure Summary Dashboard in Sysdig Monitor

    Sysdig Monitor includes default dashboards that provide metrics about number of agents installed, active policies, events that have occurred, and the policies that have triggered them. Use these dashboards to identify trends, report on coverage, or facilitate the tuning process.

    Aug 12, 2019

    Policy Editor

    *Please upgrade to an agent version 0.92.0 or greater

    This UX overhaul brings three major improvements for every Sysdig Secure user:

    • Runtime policies can import any number of security rules. You can scope the security policy using container, cloud and Kubernetes metadata.

    • Tighter Falco integration, directly from the web UI. You will be able to define a new trigger condition or append to the list of forbidden external IPs just clicking on the rule.

    • A more structured way to group, classify and lookup rules, following the standard Cloud native procedure: tags and labels.

    Rules Library

    Visualize your runtime rules properties in just a glance:

    • Where this rule comes from (Published By). The security team can instantly recognize whether a rule came from a specific Sysdig update, from a custom rules file created within the organization or from an external rules source (like the Falco community rules).

    • When was the last time it was updated (Last Updated). You can use this information to audit your rules or if you schedule periodic updates, to confirm when last happened.

    • Rule tags: An effective method for organizing your rules. You can use these tags to describe the targeted entity (host, k8s, process), the compliance standard it belongs to (MITRE, PCI, CIS Kubernetes) or any other criteria you want to use to annotate your rules.

    Falco Lists

    Easily browse, append, and re-use lists to create new rules. Lists can also be updated directly via API if users want to add existing feeds of malicious domains, or IPs.

    Falco Macros

    Easily browse, append, and re-use macros to create new rules.

    Image Scanning - View Scan Results

    Scan Results Page - The existing repositories page has been renamed “Scan Results” this page also includes new capabilities to filter based on where the images are deployed, and to easily browse/expand the different repositories to see the image:tag’s that were evaluated and their results

    Whitelist labels available in vulnerabilities view - If a vulnerability has been added to a whitelist then that status is reflected in the Vulnerability report within the scan results.

    Image Scanning Reports

    Please contact Sysdig Support to enable this feature

    The reports feature allows users to query the contents of a scan against a static or run-time scope to generate a report that shows the risk, exposure, or components of an image.

    Use cases could include:

    • A new CVE has been announced, let me find all the running images in my US East Cluster that are exposed to that CVE

    • Show me all images within my Google Container registry that have the tag prod and have a vulnerability with a fix that’s more than 30 days old

    • Show me all images with a high severity vulnerability with a fix that are running in my billing namespace

    Types of Scanning Reports

    There are three types of queries in the image scanning Reports:

    Vulnerability Query Type

    This report returns rows of vulnerabilities mapped to packages within images in a static or run-time scope. In the example above we can see the two images that are actively running in my environment now that have the CVE - CVE-2017-8831

    Package Query Type

    This report shows all images actively running in my environment that have a version of the bash package. It also shows if multiple images are running the same package name & version and if there are any CVE’s associated.

    Policy Reports

    Policy reports show all the policy evaluations that have occured, whether or not they passed or failed, and the reason why an image may have passed or failed. Reasons for passing or failing could be because of, whitelists, blacklists, or just a standard policy evaluation.

    July 12, 2019

    Minor Improvements

    • Compliance Dashboards in MonitorLink from Sysdig Secure now defaults to a 90-day view, to give users better visibility into how their posture is changing over time.

    • Image ScanningNegligible vulnerabilities are now also shown as part of the scan results summary.

    June 27, 2019

    Image Scanning: New Trigger Options

    • New Image Analyzed - Send notifications to different channels when images with a particular registry, repo, tag are scanned.

      • Some users implement these type of alerts for implementing workflows for image promotion, i.e.

        “Push an image from staging to prod registry after a webhook is sent that the image was scanned and it passed.”

    • CVE Update - Be notified whenever a vulnerability is added, updated, or removed from an image within a registry.

    Repository Alerts

    Receive alerts about activity and changes that occur within your registry. See Manage Scanning Alerts.

    Slack Notifications

    Sample output of a CVE alert:

    Sample output of an image-analyzed alert: